The casing of the Bruno I fireplace stove is made of cast iron.
Cast iron is a heat-resistant and inexpensive material.
Expands slightly when heated, providing high heat dissipation and soft radiant heat.
Cast iron stoves should be kept away from combustibles, and walls should be insulated.
The furnace is powerful, and the heat radiation penetrates 1 meter away.
Fire review
The fireplace door is decorated with glass.
The glasses are produced in only two countries: Germany and Japan. It can withstand temperatures up to 750 degrees. Through the glass, you can admire the firelight and watch as the firewood burns out and the new lining.
Size
The model measures 710mm high, 490mm wide, and 430mm deep.
Weight
Bruno I, weighing 122 kg, does not require a separate foundation.
After all, the weight is less than the mass of one or two grown men. It is sufficient to place an insulating steel plate or fireproof board under the oven.
In addition to protecting the wood floor from fire, this will allow you to spread the weight of the stove and reduce the load on the ceiling.
If the house has a thin log wooden floor and steps more than 40 cm, serious work must be done.
You will have to disassemble the area where the stove is placed and reinforce the base.
Ambience creates a wonderful atmosphere, giving warmth and cosiness to the interior.
Thanks to the Bruno I fireplace you will feel cozy and warm at home.
The reflection of the firelight and the smell of smoke will add good memories and romance.
Chimney plugs Attention! By default, the oven has a top chimney connection.
For back connections, a top plug connection to the oven may be required.
Chimney connection A chimney with a diameter of 120 mm is suitable for this oven.
Read more at Fireway: https://www.firewayhot.com/product-category/stove/
