Furnace body
The casing of the Bruno II fireplace stove is made of cast iron.
Cast iron is a heat-resistant and inexpensive material.
It expands slightly when heated, providing high heat dissipation and soft radiant heat.
Cast iron stoves should be kept away from combustibles, and walls should be insulated.
The furnace is powerful, and the heat radiation penetrates 1 meter away.
Fire review
The fireplace door is decorated with glass.
This glass is only produced in two countries: Germany and Japan.
It can withstand temperatures up to 750 degrees.
But if you play it with playing cards, it will crack.
Through the glass, you can admire the firelight and watch the firewood burn down and the new firewood lined up.
This oven uses directly for the glass.
Aspect
Fireplace stoves are available in the following dimensions:
Height: 830 mm,
Width: 490 mm,
Depth: 430mm.
Weight
The Bruno II stove weighs 131kg and does not require a separate foundation.
After all, the weight is less than the mass of one or two grown men.
It is sufficient to place an insulating steel plate or fireproof board under the oven.
In addition to protecting the wood floor from fire, this will allow you to spread the weight of the stove and reduce the load on the ceiling.
If the house has thin wooden floors and the steps exceed 40 cm, serious work must be done. You will have to disassemble the area where the stove is placed and reinforce the base.
Atmosphere
Creates a wonderful ambiance, giving warmth and coziness to the interior.
Thanks to the Bruno II fireplace you will feel cozy and warm at home.
The reflection of the firelight and the smell of smoke will add good memories and romance.
Chimney plug
By default, the stove has a top chimney connection.
For back connections, a top plug connection to the oven may be required. Sold separately.
Chimney connection A 120 mm diameter chimney is connected to the Bruno II furnace
